Sulfuric acid flow meter - Anhui Gaosheng Electric Group Co., Ltd.

product details

Products

Sulfuric acid flowmeter, also known as electromagnetic flowmeter is a high-precision, high-reliability and long service life of the flow meter, so in the design of the product structure, selection of materials, the development of technology, production, assembly and factory testing process in each of the links we are very careful to pay attention to, we also designed a set of their own **** advanced, dedicated to the production of electromagnetic flowmeter equipment and flow flow of the actual flow of the calibration device, so that both software and hardware can effectively ensure the long-term high quality of the product. On both software and hardware can effectively guarantee the long-term high quality of the product.

Electromagnetic flowmeter specially designed with backlit wide-temperature Chinese liquid crystal display, fully functional and practical, intuitive display, easy to operate and use, can reduce the inconvenience caused by other electromagnetic flowmeter English menu. In addition, we design 4-6 multi-electrode structure, to further ensure the accuracy of the measurement and at any time without grounding ring, reducing the size of the instrument and the installation and maintenance of the trouble.

Intelligent electromagnetic flowmeter performance characteristics.

◆Measurement accuracy is not affected by changes in fluid density, viscosity, temperature, pressure and conductivity, and the sensor induced voltage signal is linearly related to the average flow rate, so the measurement accuracy is high.

◆There is no resistance to flow in the measuring pipe, so there is no additional pressure loss; there is no moving part in the measuring pipe, so the sensor life is extremely long.

◆ Since the induced voltage signal is formed in the whole space filled with magnetic field, which is the average value on the pipe-loaded surface, the straight pipe section required for the sensor is shorter, with a length of 5 times the diameter of the pipe.

◆ Only the liner and electrode of the sensor part are in contact with the measured liquid, so as long as the electrode and liner materials are reasonably selected, they can be corrosion and wear resistant.

◆LDE converter adopts new type of microcontroller (MCU) and surface mount technology (SMT), which has reliable performance, high precision, low power consumption, stable zero point and convenient parameter setting. Click on the Chinese display LCD, display cumulative flow, instantaneous flow, flow rate, flow rate percentage and so on.

Flow caliber comparison table

Caliber mm	Flow range m³/h	Caliber mm	Flow range m³/h
DN10	0.16~2.5	DN400	250～4000
DN15	0.4~6	DN500	400～6000
DN20	0.6～12	DN600	600～10000
DN25	1.0～16	DN700	800～12000
DN32	1.6~25	DN800	1000～16000
DN40	2.5～40	DN900	1200～20000
DN50	4.0～60	DN1000	1600～25000
DN65	6.0～120	DN1200	2500～30000
DN80	10～160	DN1400	3000～50000
DN100	16～250	DN1600	3000～60000
DN125	25~400	DN1800	5000～60000
DN150	40～600	DN2000	6000～100000
DN200	60～1000	DN2200	1367.78～136778.4
DN250	100～1600	DN2400	1627.78～162777.6
DN300	160～2500	DN2600	1910.38～191037.6
DN350	200～3000	DN2800	2306.56 ~ 236062.8

Product Selection

model number	caliber
CH-LEL	10~2600
		nicknames	Installation form
		Y	all-in-one
		F	split
			nicknames	Converter Model
			ZA	orbicular
			ZB	Square (split only)
				nicknames	Type of power supply
				AC	220V AC 50Hz(90~245V AC 50Hz)
				DC	24V DC (20~36V DC)
				LD	Lithium battery powered (without signal output)
					nicknames
					I
					f
					Rs
					H
					C
						Medium temperature
						≤65℃
						≤120℃
						≤180℃(Split type only)
						nicknames	Lining Material
						NE	neoprene（≤65℃）
						PVC	（≤70℃）
						PU	(≤80℃)
						PTFE	（≤180℃）
							nicknames	Electrode Material
							316L	stainless steels
							HC
							Ti
							Ta
							Pt
Warm tips: flowmeter selection must, media, caliber (flow range), electrode material, lining material, installation requirements

Electromagnetic flowmeter advantages and disadvantages comparison table

Electromagnetic flow meter
	vantage	drawbacks
1	There are no moving parts and no throttling parts in the measuring tube to impede the flow of fluid, which does not cause any additional pressure loss when the fluid passes through the meter.	It can only measure the liquid flow of conductive media, not the flow of non-conductive media
2	Electromagnetic flow meters can be used to measure the flow of other electrically conductive liquids after calibration with water only.	Cannot be used to measure gases, vapors, or liquids containing large quantities of gases.
3	Their range ratios can be up to 20:1, and some even up to 100:1 range ratios.	The medium in the pipe must be full, and cannot be measured out of a full pipe.
4	No mechanical inertia, sensitive response, can measure instantaneous pulsating flow, positive and negative direction of flow	Can only be measured above DN10 pipe, not applicable to small diameter
5	Measure the flow of corrosive media, spoiled media and suspended liquid-solid two-phase flow.	Cannot measure hydrofluoric acid media

Installation Specifications

1, should be installed in the horizontal pipeline lower and vertically upward, avoid installation in the pipeline *** point and vertical downward;

2、It should be installed at the rising place on the pipeline;

3, in the open discharge pipeline installation, should be installed in the lower part of the pipeline;

4、If the pipeline drop is more than 5m, an exhaust valve should be installed downstream of the sensor;

5, should be installed downstream of the sensor control valves and shut-off valves, and should not be installed in the sensor upstream;

6, the sensor *** can not be installed in the pump inlet and outlet, should be installed in the pump outlet.