Compressed air flow meter - Anhui Gaosheng Electric Group Co., Ltd.

product details

Products

Compressed air flow meter is mainly used for industrial pipeline media fluid flow measurement, such as gas, liquid, steam and other media. It is characterized by small pressure loss, large range, high accuracy, in the measurement of the volume flow of the working condition is almost independent of the fluid density, pressure, temperature, viscosity and other parameters. There are no moving mechanical parts, so high reliability and low maintenance. Instrument parameters can be stabilized for a long time. Vortex flowmeter using piezoelectric stress sensor, high reliability, can be in -20 ℃ ~ +250 ℃ working temperature range. There are analog standard signals, there are also digital pulse signal output, easy to use with computers and other digital systems, is a more advanced, ideal flow meter. Our company can produce vibration-resistant vortex flowmeter, has been widely put into use!

a thoroughfare （DN）	Liquid flow range （m3/h）	Output frequency range （Hz）	Gas flow range （m3/h）	Output frequency range （Hz）
15	1.2～6.2	90～900	5～25	265～2640
20	1.5～10	40～396	8～50	218～1982
25	1.6～16	32～325	10～70	172～1420
32	2～20	20～250	15～150	130～1350
40	2.5～25	13～130	22～220	115～1147
50	3.5～35	9～93	36～320	96～854
65	6～60	8～82	50～480	61～583
80	10～100	6～65	70～640	45～417
100	15～150	5～50	130～1100	43～367
125	25～250	5～47	200～1700	33～290
150	40～400	4～40	280～2240	27～221
200	80～800	3～33	580～4960	24～207
250	140～1400	3～26	970～8000	20～171
300	200～2000	2～22	1380～11000	17～136

External Dimensions

a thoroughfare

（DN）

（mm）

360

365

370

375

383

100

390

100

125

400

125

145

470

150

165

500

200

196

580

250

235

650

300

255

700

Installation Diagram

caveat

legend (of a map, etc)

1、Expand the installation of the pipe

For small diameter and large flow, must expand the installation of the pipe, while ensuring that the flow meter before the straight section ≥ 15D, after the straight section ≥ 5D

2、Shrinking pipe installation

For large caliber small flow, must be reduced installation, while ensuring that the flowmeter before the straight section ≥ 15D, after the straight section ≥ 5D

3、The installation of elbow

If the front end of the flowmeter has 90 ° elbow or T-type connector, to ensure that the flowmeter before the straight section ≥ 15D, after the straight section ≥ 5D

4, the same plane two elbow installation

If the front of the flowmeter has two 90 ° elbow, to ensure that the flowmeter before the straight section ≥ 20D, after the straight section ≥ 5D

5, the installation of two elbows in different planes

If the front of the flowmeter has two 90 ° elbow, to ensure that the flowmeter before the straight section ≥ 25D, after the straight section ≥ 5D

6、Installation of adjustment valve

If the flowmeter before and after the need to install control valves, to ensure that the flowmeter before the straight section ≥ 25D, after the straight section ≥ 5D