Hydrochloric Acid Magnetic Flap Level Gauge

Introduction of Hydrochloric Acid Magnetic Flap Level Gauge:

Our company specializes in the production of hydrochloric acid magnetic flip-flop level meter, suitable for corrosive media and working temperature and high temperature occasions of liquid level measurement, reliable structure, long service life. Hydrofluoric acid and other strong corrosive media level measurement zui good choice. Customized for customers, the temperature and pressure requirements are not high you can use the company's PP material level meter.PP material side mounted (top mounted) magnetic flap level meter corrosion-resistant magnetic flap level meter for underground tanks, tanks or pools and corrosive media and the measurement of liquid level, according to the different mediums, temperatures, pressures, and other conditions are divided into the following several forms for customers to choose from. Users can according to engineering needs, with the use of remote transmitter, can realize the local digital display, as well as the output of 4 ~ 20mA standard telecommunication signal, according to a variety of systems supporting, but also with the use of magnetostrictive level transmitter, in order to cooperate with the recording instrumentation, or the needs of industrial process control. It can also be used with magnetic control switches or proximity switches to monitor and alarm the liquid level or to control the liquid inlet and outlet equipment.

Introduction of Hydrochloric Acid Magnetic Flap Level Meter:

The company also specializes in the production of hydrochloric acid magnetic flip-flop level gauge using stainless steel body lined with polypropylene (PP) and polytetrafluoroethylene (PTFE) process, has high structural strength and corrosion resistance, can be applied to hydrochloric acid and other acidic liquids, alkaline liquids and organic solvents. However, it is not suitable for the measurement of concentrated nitric acid, chlorine-containing solvents, aromatics, aliphatic and other media liquids. Side-mounted lined corrosion-resistant magnetic flip-flop level meter has stainless steel body lined with polytetrafluoroethylene (PTFE) and stainless steel lined with polypropylene (PP) two kinds, suitable for corrosive media measurement. Side-mounted lined magnetic flip-flop level gauge (PTFE) is suitable for corrosive media and working temperature and high temperature occasions of liquid level measurement, the use of advanced stainless steel lined with polytetrafluoroethylene tensile flap new technology, reliable structure, long service life. It is the best choice for level measurement of hydrofluoric acid and other strong corrosive media. Side-mounted lined magnetic flip-flop level meter (PP) for hydrochloric acid, dilute sulfuric acid and other inorganic corrosive liquid measurement, due to the use of imported high-strength can be close to the metal, especially PPR good insulation, the product is suitable for outdoor water tank level measurement, in winter, the internal will not freeze. But not as good as PTFE lining temperature and pressure resistance, temperature and pressure is lower when using this product is more cost-effective. Users can according to engineering needs, with the use of remote transmitter, can realize the local digital display, as well as output 4 ~ 20mA standard remote signal, in order to match the recording instrumentation, or industrial process control needs. It can also be used with magnetic control switches or proximity switches, etc., to monitor and alarm the liquid level or to control the liquid inlet and outlet equipment.

PP material side mounted (top mounted) magnetic flap level meter basic technical parameters:

Measuring range: 300～4000mm (special order is available for more than 5000mm)

Display accuracy: ±10mm;

Working pressure: PP: normal pressure

Medium temperature: PP: -20～70℃;

Medium density: ≥.0.5g/cm3;

Medium viscosity: ≤0.4Pa-S;

Process connection: DN2025/50/80/150 PN1.0 (executive standard HG20592~20635-97), if you need other standards can be manufactured according to customer requirements.

Catch liquid material: /PP, etc.

(according to the chemical nature of the medium and the use of temperature and pressure selection)

Float material: 316L, PVC/UPVC/CPVC/PP, PTFE, titanium, etc.

Parameters of PTFE lined anticorrosive magnetic flap level meter:

Measuring range: 300～5000㎜ (special order is available when exceeding 5000mm)

Display accuracy: ±10mm;

Working pressure: stainless steel lined with PTFE: ≤ 2.5MPa;

Stainless steel lined with PP: ≤ 1.0Mpa 

(Our company zui high pressure can do 25Mpa, see high temperature and high pressure type instrument)

Medium temperature: Stainless steel lined PTFE: -20~200℃;

Stainless steel lined with PP: -20~90℃.

Medium density: ≥.0.5g/cm3;

Medium density difference: ≥.0.15g/cm3 (measurement boundary).

Installation, use and maintenance

1, first check the level meter label data and ordering requirements are consistent with the distance from the level meter around the 200mm range shall not have the excitation of iron and other magnetic substances, otherwise it will affect the normal operation of the level meter.

2, the level meter and the container should be equipped with a shut-off valve between the maintenance and cleaning to cut off the material. The installation of the body must be vertical, *** offset angle ≤ 3 °. Measuring range > 4m in the process of installation and use should increase the intermediate support point.

3, the liquid level meter into operation, should first open the upper flange gas-phase valve, and then slowly open the lower flange liquid-phase valve, so that the medium slowly flow into the cylinder so that the flip column (plate) one by one tracking instructions, and adjust the zero level with the adjusting screw.

4、Level meter guard conduit and the main conduit must be kept vertical.

5、After the installation is completed, it is necessary to guide the flip column of the display with magnet once so that it shows red above zero level and white below zero level.