Hygienic Pressure Transmitter

Mainly used in food, drugs, beverages, brewing, medical equipment and other equipment for high temperature fluid/melt/gas media pressure measurement and control.

Main Technical Parameters

Range: 0~1~300MPa

Output: 2.0mV/V;4～20mA;0～5V;1～5V;0～10V

Calibration signal: 80% FS calibration; zero and full scale adjustment

Zero temperature drift: ≤±0.05%FS℃

Range temperature drift: ≤±0.05%FS℃

Limit overload: 200%FS

Response time: 5 mS (up to 90%FS)

Supply voltage: Sensor: 10VDC (6-12VDC) Transmitter: 24VDC (9-36 V)

Long-term stability: 0.1%FS/year

Insulation resistance: more than 2000MΩ 100VDC

Vibration effects: for 20HZ-1KHZ mechanical vibration, the output change is less than 0.1%FS

Signal lead-in: 5-pin connector 5pin

Thread connection: M14X1.5; M16X1.5; M18X1.5; M20X1.5; M22X1.5.

Sanitary pressure transmitter is a sanitary pressure transmitter suitable for food process measurement, its flush pressure interface can be realized through the British thread or clamp and sanitary tube, clamp and sanitary tube composition, according to the different requirements of other pressure interface for choice.SC433 pressure transmitter in the food, pharmaceutical, brewing, fermentation and other industries commonly used. Sub-conventional type, high-temperature heat dissipation type, clamp inserted into the flat membrane type, clamp oil-filled type (sanitary), clamp flat membrane type, flush membrane type, all stainless steel type.

If the medium temperature is high, you can choose the cooling transition connection. The transmitter can ****measure temperatures up to 300°C. The transmitter can also be used with a cooling transition. In addition to silicone and food-compatible oils, halogenated hydrocarbons and other filling oils are also available on request.

Features of the hygienic pressure transmitter

Low temperature sensitivity

High quality linearity

Long-term stability

Accuracy option: 0.25% FSO

Optional explosion-proof: Ex ia IIC T6

Pressure connections: G1/2 FLUSH, G1 1/2 FLUSH, etc. or various sizes of clamps.

Pressure ranges from 0 to 2KPa to 0 to 100MPa.

Silicone and food-compatible oils, halogenated hydrocarbons and other filling oils are available on request.

Output Signal/Power Supply Standard is 2-wire, 4-20 mA to 12-36 VDC.

Accuracy according to IEC60770, 0.175%FSO/0.125%FSL BFSL

Medium temperature -25～125℃, up to 300℃ when equipped with condensing unit.

Circuit/Ambient Temperature -25～85℃

Storage Temperature -40～125℃

Material: Stainless steel 1.4571(316Ti)

Housing: Stainless steel 1.4301(304)

Diaphragm: Stainless steel 1.4435(316L)