Vortex Flow Meter for Steam - Anhui Gaosheng Electric Group Co., Ltd.

product details

Products

1、 Product principle

The CH-LU steam vortex flowmeter is mainly used for flow measurement of industrial pipeline media fluids, such as gases, liquids, vapors, and other media. Its characteristics are small pressure loss, large range, high accuracy, and almost unaffected by parameters such as fluid density, pressure, temperature, viscosity, etc. when measuring volumetric flow rate under working conditions. No movable mechanical parts, therefore high reliability and low maintenance. The instrument parameters can remain stable for a long time. The vortex flowmeter adopts a piezoelectric stress sensor with high reliability and can operate within a temperature range of -20 ℃ to+250 ℃. It has both analog standard signals and digital pulse signal outputs, making it easy to use in conjunction with digital systems such as computers. It is a relatively advanced and ideal flow meter.

2、 Technical parameters

1. Measurement medium: gas, liquid, vapor;

2. The caliber specification for flange card mounted calibers is 25, 32, 50, 80, and 100;

3. The selection of flange connection caliber is 100, 150, 200;

4. The normal measurement range for flow rate is Reynolds number 1.5 × 104 to 4 × 106; Gas velocity of 5-50m/s; Liquid 0.5-7m/s;

5. Measurement accuracy of 1.0 level and 1.5 level;

6. Temperature of the tested medium: normal temperature -25 ℃ -100 ℃; 7. High temperature -25 ℃~150 ℃ -25 ℃~250 ℃;

7. Output signal pulse voltage output signal high level 8-10V low level 0.7-1.3V;

8. Pulse duty cycle of about 50%, transmission distance of 100m;

9. Pulse current remote transmission signal 4-20 mA, transmission distance of 1000m;

10. Instrument operating environment temperature: -25 ℃~+55 ℃ humidity: 5-90% RH50 ℃;

11. Material: stainless steel, aluminum alloy;

12. Power supply DC24V or lithium battery 3.6V;

a thoroughfare （DN）	Liquid flow range （m3/h）	Output frequency range （Hz）	Gas flow range （m3/h）	Output frequency range （Hz）
15	1.2～6.2	90～900	5～25	265～2640
20	1.5～10	40～396	8～50	218～1982
25	1.6～16	32～325	10～70	172～1420
32	2～20	20～250	15～150	130～1350
40	2.5～25	13～130	22～220	115～1147
50	3.5～35	9～93	36～320	96～854
65	6～60	8～82	50～480	61～583
80	10～100	6～65	70～640	45～417
100	15～150	5～50	130～1100	43～367
125	25～250	5～47	200～1700	33～290
150	40～400	4～40	280～2240	27～221
200	80～800	3～33	580～4960	24～207
250	140～1400	3～26	970～8000	20～171
300	200～2000	2～22	1380～11000	17～136

External Dimensions

a thoroughfare

（DN）

（mm）

360

365

370

375

383

100

390

100

125

400

125

145

470

150

165

500

200

196

580

250

235

650

300

255

700

Installation Diagram

caveat

legend (of a map, etc)

1、Expand the installation of the pipe

For small diameter and large flow, must expand the installation of the pipe, while ensuring that the flow meter before the straight section ≥ 15D, after the straight section ≥ 5D

2、Shrinking pipe installation

For large caliber small flow, must be reduced installation, while ensuring that the flowmeter before the straight section ≥ 15D, after the straight section ≥ 5D

3、The installation of elbow

If the front end of the flowmeter has 90 ° elbow or T-type connector, to ensure that the flowmeter before the straight section ≥ 15D, after the straight section ≥ 5D

4, the same plane two elbow installation

If the front of the flowmeter has two 90 ° elbow, to ensure that the flowmeter before the straight section ≥ 20D, after the straight section ≥ 5D

5, the installation of two elbows in different planes

If the front of the flowmeter has two 90 ° elbow, to ensure that the flowmeter before the straight section ≥ 25D, after the straight section ≥ 5D

6、Installation of adjustment valve

If the flowmeter before and after the need to install control valves, to ensure that the flowmeter before the straight section ≥ 25D, after the straight section ≥ 5D